Enables you to maintain FTP system parameters used throughout the system.

Password

Password

Enter the FTP password.

Paging Area

ID

Display only. The parameter ID.

Value

The current parameter value. A new parameter value can be entered, if required.

The parameter IDs, and default parameter values are as follows:

Parameter ID	Description	Default Parameter Value
HOST	Server name or server's IP address.
LOG	Enables messages to be written to the client PC's application log if set to 1.	0
MACH_TYPE	Set to LINUX if you run the server to server FTP process on a Linux® server, otherwise leave blank.
METHOD	Transfer Method, can be one of the following if the type is set to RLFILETRANSFER: CLIENT - enables CLIENT side transfers to be used instead of FTP. FTP SFTP FTPSnodata - FTP + SSL with unsecured data channel FTPSwithdata - FTP + SSL with secured data channel FTPImplici - FTP + SSL implicit on port 990	FTP
PASSIVE	Indicates if the transfer is passive. This should only be changed if advised by Zellis.	1
TYPE	Determines the file transfer routine- if this is not set, the old method (DLFILE16.exe) is used, which only supports FTP.	RLFILETRANSFER
USERNAME	FTP user name

MD97G32